Store at 40-95°F (5-35°C). Precondition material to over 73°F (23°C)
35 min. at 73°F (23°C)
60 Ton/Tons per Month epoxy adhesive
Packaging & Delivery
Plastic barrel package or as each customer required. Neutral packing,
1 - 1000
To be negotiated
Hbond-300 Crack repair epoxy:
A solvent-free, moisture-insensitive, two-component, 100% solids structural paste epoxy adhesive
Cap sealing and port setting
Bonding irregular surfaces
Component A - white Component B - grey Shelf Life: 2 years in original unopened container Storage Conditions: Store at 40-95°F (5-35°C). Precondition material to over 73°F (23°C) Gel Time: 35 min. at 73°F (23°C)
1 gal./3.8 L of mixed epoxy yields 231 cu. in./3,746 cu. cm of epoxy.
1 gal./3.8 L units (two .5 gal. cans)
2 gal./7.6 L units (two 1 gal. cans)
Minimum substrate temperature is 40°F (5°C).
Do not thin. Solvents will prevent proper cure
To bond irregular surfacese:
Apply the mixed Hbond-300 Crack repair epoxy to the prepared substrates. Work into the substrate for positive adhesion. Secure or clamp the bonded surfaces firmly into place until the epoxy has cured. Glue line should not exceed 1/8 in./0.32 cm.
Part A ; Part B
Density (g / cm3)
A part 1.6
B part 1.5
Shear bond strength(Mpa)
≥40 25°C ,7 days
Tensile Strength (Mpa)
≥30 25°C ,7 days
30-45 mins 25°C
concrete-concrete bond strength (Mpa)
≥2.5 25°C ,7 days
Part A 22.5 kg
Part B 7.5kg
EQUIPMENT: Uncured material can be removed with Unitex CITRUS CLEANER or other approved solvent. Cured material can only be removed mechanically.