HB-390 is high-strength, two component epoxy anchoring adhesive,part A, part B
have been placed inside the sized pipe. with the role of a dedicated injection gun, the
two kinds of components that can be replaced in the own-type static mixers are fully mixed, injected directly into the borehole and quickly curing, so as to achieve the purpose of fixed objects.
Chemical anchoring for bolts, dowels, and pins.
Pressure-injection of cracks in structural concrete.
Bonding irregular surfaces.
Cap sealing and port setting.
Permitted for use in wet or damp holes
Permitted in severe weathering locations
Suitable for seismic conditions
Allowed at close edge distances
Allowed at shallow embedments
For both solid and hollow base materials
To anchor bolts, dowel,& pins
Step 1. Drill holes to proper diameter and length.
Step 2. Clean holes with a nylon brush
Step 3. Blow concrete dust from hole with oil-free compressed
air from back forward.
Step 4. After uniform color is achieved, static mixer should be
placed in back of hole. Start extruding epoxy while
pulling static mixer out, filling hole 2/3 full. rotate the
bolt slightly as it is inserted to the back of the hole.
refer to tables for annular space, embedment depth,and edge distances.
Operating time (min)
Dry surface time (h)
Setting time (h )
360ml cartridge Part A :Part B= 5:1 30Pcs/ Carton.